SNV160+2218K+H318 SNV pillow block housing
Stock Check: This item is in stock Checking Stock
Product Information
Bore | 80 |
Type | SNV160 |
Base Length a | 345 |
Base Width b | 100 |
Foot Thickness c | 35 |
Base to Centre h | 100 |
Overall Width l | 145 |
Bolt Hole CRS M | 290 |
Foot Bolts G | M20 |
u | 22 |
v | 27 |
Overall height h1 | 201 |
Brief Description | SNV pillow block housing |
Housing | SNV160-F-L |
Seal One | DH518 |
V-Ring Seal | DHV518 |
Cover | DKV160 |
Bearing | 2218K |
Adaptor Sleeve | H318 |
Locating Ring 2 x per Housing | FRM160/12,5 |
Manufacturer | FAG |
Material | Cast Iron |
Housing Breaking Load in load direction 55° kN | 530 |
Housing Breaking Load in load direction 90° kN | 335 |
Housing Breaking Load in load direction 120° kN | 250 |
Housing Breaking Load in load direction 150° kN | 210 |
Housing Breaking Load in load direction 180° kN | 265 |
Product Description
SNV160+2218K+H318 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2218K are attached to the shaft using an adapter sleeve H318. This SNV pillow block housing has a 80 mm Bore Size with Bolt hole centres of 290mm and a base to centre height of 100mm, these units combined with the various sealing elements results in a variety of possible designs, which makes up FAG’s standard range There are a wide variety of sealing options for the housing due to the large number of practical applications. Other parts are locating ring FRM160/12,5 of which two are required per unit. Covers DKV160 can also be added to the unit. The most important factors are the speeds and the external influences that act on the unit. If you require additional information please contact Sales on 01952 676925.