CALL US ON: 01952 676925      |       CONTACT US

Basket Total: £0.00
Product Filter

Dunlop

  • List View
  • Grid View

SPC1250X4-DUN | Dunlop Vee Pulleys

SPC1250X4-DUN manufactured by Dunlop can be used on all types of industrial equipment. For use with a 5050 bush, this V Pulley offers versatility and reduced down time for maintenance purposes, With an outside diameter of 1259.6mm, this Cast Iron pulley is available to suit all C & SPC belt cross sections. If you require …

    £895.87(ex VAT)

    83-76 | Dunlop BS Sprocket Taper Bush

    This 76 teeth 1” sprocket to fit taper bush 4030 is manufactured by Dunlop in Cast Iron . This Triplex sprocket fits chain 1” x 17.02mm and has a part number 83-76 and is available from stock. If you require additional information please contact Sales on 01952 676926.

      £904.08(ex VAT)

      12TR57-CAST | Dunlop BS Sprocket

      This 57 teeth 1-1/2” sprocket with a Pilot Bore of 70 mm is manufactured by Dunlop in Cast Iron . This Triplex sprocket fits chain 1-1/2” x 1” and has a part number 12TR57-CAST and is available from stock. If you require additional information please contact Sales on 01952 676926.

        £904.89(ex VAT)

        12DR76-CAST | Dunlop BS Sprocket

        This 76 teeth 1-1/2” sprocket with a Pilot Bore of 55 mm is manufactured by Dunlop in Cast Iron . This Duplex sprocket fits chain 1-1/2” x 1” and has a part number 12DR76-CAST and is available from stock. If you require additional information please contact Sales on 01952 676926.

          £905.73(ex VAT)

          SPC1000X6-DUN | Dunlop Vee Pulleys

          SPC1000X6-DUN manufactured by Dunlop can be used on all types of industrial equipment. For use with a 5050 bush, this V Pulley is statically balanced for peripheral speeds up to 35 m/sec., With an outside diameter of 1009.6mm, this Cast Iron pulley is available to suit all C & SPC belt cross sections. If you …

            £907.88(ex VAT)

            SPB1000X10-DUN | Dunlop Vee Pulleys

            SPB1000X10-DUN manufactured by Dunlop can be used with a 5050 bush, Part numbers are identified by 3 letters (e.g. SPB) which represents the belt cross section, a 2, 3 or 4 digit number (e.g. 1000) which is the pulleys pitch diameter and a 1 or 2 digit number (e.g. 10) the number of grooves/belts to …

              £944.94(ex VAT)

              14TR38 | Dunlop BS Sprocket

              This 38 teeth 1-3/4” sprocket with a Pilot Bore of 40 mm is manufactured by Dunlop in C45 steel. . This Triplex sprocket fits chain 1-3/4” x 1-1/4” and has a part number 14TR38 and is available from stock. If you require additional information please contact Sales on 01952 676926.

                £972.87(ex VAT)

                SPC800X10-DUN | Dunlop Vee Pulleys

                SPC800X10-DUN manufactured by Dunlop can be used with a 5050 bush, Part numbers are identified by 3 letters (e.g. SPC) which represents the belt cross section, a 2, 3 or 4 digit number (e.g. 800) which is the pulleys pitch diameter and a 1 or 2 digit number (e.g. 10) the number of grooves/belts to …

                  £998.90(ex VAT)

                  SPC1250X5-DUN | Dunlop Vee Pulleys

                  SPC1250X5-DUN manufactured by Dunlop can be used with a 5050 bush, Part numbers are identified by 3 letters (e.g. SPC) which represents the belt cross section, a 2, 3 or 4 digit number (e.g. 1250) which is the pulleys pitch diameter and a 1 or 2 digit number (e.g. 5) the number of grooves/belts to …

                    £1,005.75(ex VAT)

                    C53-DUN | Wrapped V Belts

                    V-Belts for industrial use are designated both to RMA standard C53-DUN where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard 22x1346Li, where the first number denotes the width in mm, and the second number is the internal length in mm. If you require …

                      £1,019.24(ex VAT)